Tuesday 31 December 2013

January Sale.........


It's January sale time.

10% off all fabrics, yarns and kits

 Starting 10:00 am 

 Thursday 2nd January 2014.

For one week only




Friday 6 December 2013

Winter Penguin Bunting - Tutorial (easy)


Bunting made with the adorable Winter Penguins fabric from Benartex


Requirements: Winter Penguin fabric, 1/2" cotton tape, thread, pins and pinking shears. You will also need a sewing machine. I used the wonderful Brother Innovis 550, but any machine that will do a straight stitch will do! 



Cut the bunting squares using pinking shears, then pair them up. You could use a plain fabric on the back if your bunting is going against a wall, I did ours double sided as it is going in the window. Pin the pairs with wrong sides together on three sides leaving top edge open


Open top edge and, leaving enough tape to the left of the square for hanging purposes, insert the tape between the squares.


Pin top edge through all three layers


Leaving a suitable gap (I left approximately one inch) pin the next pair to the tape. Repeat until all the squares are pinned in place.


Beginning at the top edge of the first square, stitch through all three layers, removing the pins as you go. Stop at the corner with the needle in the fabric. 


Turn through 90 degrees and sew the next side, continue round the square until you get back to the first corner. Stitch over the first row of stitching, then continue along the tape to the next square. 


Stitch around all the squares. Remove from the sewing machine, hang in place and admire.  


I know its not pictured in the window, I couldn't get a decent photo in the window so I temporarily pinned it to the door frame. It's back in the window now!